Scan Sensor Jam - Lexmark X925 Service Manual

Step Action and questions
14 Replace the ICC board. Did this fix the issue?

283.05 Scan sensor jam

Step Action and questions
1 Remove the paper from the ADF. Did this resolve the
problem?
2 Does the duplex paper pass sensor have dust on it, or
debris blocking the sensor?
3 Clean the sensor. Did this fix the issue?
4 Check the sensor (ADF skew sensor) for proper
operation.
1. Enter the Diagnostics Menu.
2. Touch SCANNER TESTS.
3. Touch Sensor Tests.
4. Observe the line "sensor (ADF skew sensor)"
Does the display on the operator panel, change every
time the sensing area of the above sensor is
interrupted or blocked?
5 Check J1 on the ADF relay card for proper
connectivity. Is the sensor cable properly connected to
the ADF relay card?
6 Reconnect the cable to the ADF relay card. Did this fix
the issue?
7 Check pin 1, 4, 7, 10 for 5V and pin 3, 6, 9, 12 for GND
on connector J1 on the ADF relay card. Are they
present.
8 Replace the inner cover sensor assembly. Did this fix
the issue?
Check the ADF motor assembly for proper connection
9
to J2 and J6 on the ADF relay card. Are the motors
properly connected?
10 Connect the cables. Did this fix the issue?
11 Replace the ADF motor assembly. Did this fix the
issue?
12 Check the ADF cable for continuity. Is there continuity?
13
Replace the ADF cable did this resolve the issue?
14 Replace the ADF relay card. Did this fix the issue?
15
Replace the ICC board. Did this fix the issue?
Yes No
Problem resolved Replace the RIP
board. See
board removal"
on page
Yes No
Problem resolved Go to step 2.
Go to step 3. Go to step 4.
Problem resolved Go to step 4.
Go to step 4. Go to step 3.
Go to step 7. Go to step 6.
Problem resolved Go to step 7.
Go to step 8. Go to step 9.
Problem resolved Go to step 9.
Go to step 10 Go to step 11.
Problem resolved Got to step 11.
Problem resolved Go to step 12.
Go to step14. Go to step 13.
Problem Go to step 14.
resolved.
Problem resolved Go to step 15.
Problem resolved Replace the RIP
board. See
board removal"
on page
Diagnostic information
7541-03x
"RIP
4-73.
"RIP
4-73.
2-31