Lexmark X925 Supplies Manual

Supplies guide
The following table lists the part numbers for ordering supply items.

Ordering toner cartridges

When 88.xx [color] cartridge low, or 88.xx [color] cartridge nearly low appears, order a new
cartridge.
When 88.2x Replace [color] cartridge appears, replace the specified cartridge.
Estimated cartridge yield is based on the ISO/IEC 19798 standard (with about 5% coverage per color). Extremely low print
coverage (less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may
cause cartridge parts to fail prior to exhaustion of toner.
Recommended toner cartridges and part numbers
Part name
Black high-yield toner cartridge
Yellow high-yield toner cartridge
Magenta high-yield toner cartridge
Cyan high-yield toner cartridge

Ordering imaging units

When 84.xx [Color] imaging unit low, or 84.xx [Color] imaging unit nearly low appears, order a
replacement imaging unit.
When 84.xx Replace [color] imaging unit and [color] cartridge appears, replace the specified imaging
unit and toner cartridge.
Recommended imaging units and part numbers
Part name
Black imaging unit
Yellow imaging unit
Magenta imaging unit
Cyan imaging unit

Ordering a fuser or a transfer module

When 80.xx Fuser life warning, 80.xx Fuser near life warning, or 83.xx Transfer module life
warning appears, order a replacement fuser or a transfer module.
Supplies guide
Page 1 of 2
Part number
C925H2KG
C925H2YG
C925H2MG
C925H2CG
Part number
C925X72G
C925X75G
C925X74G
C925X73G