Wrong Paper Size Service Check - Tray1; Wrong Paper Size Service Check - Tray2 - Lexmark X925 Service Manual

Wrong paper size service check - tray1

Step Action and questions
1 Check the size indicator on the front of the tray. Is it set
to the correct size?
2 Set the indicator to the correct size. Did this fix the
issue?
3 Is the sensor cable properly connected to the sensor
and engine board?
4 Connect the cable. Did this fix the problem?
5 Check the cable for continuity. Is there continuity?
6 Replace the cable. Did this fix the issue?
7 Replace the sensor. Did this fix the issue?
8 Replace the engine board. Did this fix the issue.

Wrong paper size service check - tray2

Step Action and questions
1 Remove the tray, and move the paper size guides to
different positions. Are the size pins moving when the
length guide is moved?
2 Try a different paper standard tray. Did this fix the
problem?
3 Check the sensor cables for proper connection to the
sensors and engine controller board. Are they properly
connected?
4 Properly connect the cables. Did this fix the problem?
5 Replace the sensors. Did this fix the problem?
6 Replace the engine controller board. Did this fix the
problem?
Yes No
Go to step 3. Go to step 2.
Problem solved Go to step 3.
Go to step 5. Go to step 4.
Problem resolved Go to step 5.
Go to step 7. Go step 6.
Problem resolved Go to step 7.
Problem resolved Go to step 8.
Problem resolved Contact your
second level
support.
Yes No
Go to step 3. Go to step 2.
Problem resolved Go to step 3.
Go to step 5. Go to step 4.
Problem resolved Go to step 5.
Problem resolved Go to step 6.
Problem resolved Contact your
second level
support.
Diagnostic information
7541-03x
2-95