Hvps Removal - Lexmark X925 Service Manual

HVPS removal

1.
Remove the rear cover. See
2.
Remove the top cover. See
3.
Remove rear EMI shield. See
4.
Remove three screws (A) attaching the HVU to the frame.
Note: The upper left screw is different than the other two.
5.
Pinch the nylon retainer (B) to free the board.
"Rear cover" on page 4-7.
"Output bin (print engine top) cover" on page
"Rear EMI shield – Not a FRU" on page
7541-03x
4-17.
4-106.
Repair information
4-111