Lexmark X925 Service Manual page 121

Step Questions / actions
12 Is the device physically connected (ethernet
cable) to the network?
13 Try using a different ethernet cable.
Did this remedy the situation?
14 Have the network administrator check the
network drop for activity.
Is the drop functioning properly?
15 Is the printer on the same wireless network as
the other devices?
16 Assign the correct wireless network to the
printer.
Did this fix the problem?
17
Are the other devices on the wireless network
communicating properly?
18 Verify that the ISP wireless card cable and any
other ISP cables are properly seated in their
connectors.
Are the cables connected correctly?
19 Properly reseat the ISP cables.
Did this fix the problem?
Perform the option card service check. See
20
"Option card service check" on page
Was there another faulty ISP option?
21 Replace the ISP wireless card?
Did this fix the problem
Yes
Go to step 13.
Problem resolved
Replace the controller
board. See "RIP board
removal" on page
Go to step 17.
Problem resolved
Go to step 18.
Go to step 20.
Problem resolved.
Replace the faulty ISP
2-86. option.
Problem resolved.
No
Go to step15.
Go to step 14.
Contact the network
administrator.
4-73.
Go to step 16.
Go to step 17.
Contact the network
administrator.
Go to step 19.
Go to step 20.
Go to step 21.
Replace the RIP. See
board removal" on
page 4-73.
Diagnostic information
7541-03x
"RIP
2-85