Lexmark X925 Service Manual page 106

7541-03x
Error code
35 Insufficient memory
to support Resource
Save feature
37 Insufficient memory
to collate job
37 Insufficient memory
for Flash Memory
Defragment operation
37 Insufficient memory,
Some Held Jobs Were
Not Restored
37 Insufficient memory,
Some Held Jobs Will
Not Be Restored
37 Insufficient Defrag
Memory
38 Memory Full
39 Complex Page
50 PPDS Font Error
2-70
Service Manual
Action
• Select Continue to disable Resource Save and continue printing.
• To enable Resource Save after receiving this message:
- Make sure the link buffers are set to Auto, then exit the menus to activate the link
buffer changes.
- When Ready is displayed, enable Resource Save.
• Install additional memory.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
• Select Continue to print the portion of the job already stored and begin collating the rest
of the job.
• Cancel the current job.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
• Select Continue to stop the defragment operation and continue printing.
• Delete fonts, macros, and other data in printer memory.
• Install additional printer memory.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
• The printer deleted some held jobs in order to process current jobs.
• Select Continue to clear the message.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
• The printer was unable to restore some or all of the confidential or held jobs on the hard
disk.
• Select Continue to clear the message.
• If this message occurs again, replace the hard drive.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
There is insufficient memory to perform the Flash Memory Defragment operation. The user
can:
• Delete font, macros, and other data in memory.
• Install additional printer memory.
The following options are available:
• Select Continue to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• Install additional printer memory.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
The page is too complex to print. Options are:
• Select Continue to continue. The job may not print correctly.
• Cancel the job.
• Select Continue to clear the message and continue printing. The job may not print
correctly.
• Cancel the current job.
• If this does not fix the problem, replace the RIP board. See
page 4-73.
"RIP board removal" on
"RIP board removal" on
"RIP board removal" on
"RIP board removal" on
"RIP board removal" on
"RIP board removal" on
"RIP board removal" on