Lexmark X925 Service Manual page 103
Hide thumbs
Also See for X925:
- User manual (334 pages) ,
- Quick reference (19 pages) ,
- Maintenance manual (18 pages)
Table of Contents
Advertisement
Error code
Close Tray Door
Close Front Door
Disk Corrupted,
Reformat?
Held Jobs May Not Be
Restored
Insert Tray <x>
Install Tray<x>or Cancel
Job
Load <source>
<custom type name>
Load <source>
<Custom String>
Load <source> <size>
Load <source> <type>
<size>
Load Manual <custom
type name>
Load Manual
<custom string>
Action
Close the front door securely.
The printer has attempted a disk recovery and cannot repair the disk. The disk must be
formatted to use.
Warning: All files stored on the disk will be lost.
The printer has attempted to restore Held jobs, but not all were restored.
Insert tray to clear the message.
Install tray to clear the message.
Load paper in the indicated source and of the indicated type. Additional messages may
include:
• Paper loaded—Select Continue.
• More information—the printer will present instructions.
• Cancel Job—the printer job can be canceled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load paper in the indicated source, and select Continue.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
Load paper in the indicated source and of the indicated size, and select Continue.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
• Wait for supplies—If job parking is enabled, and the job meets all the requirements for
allowing the job to be parted, the printer adds this message.
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing Select indicates to the printer it should search for a source with the proper custom
type.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing Select indicates to the printer it should search for a source with the proper custom
string.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
7541-03x
2-67
Diagnostic information
Advertisement
Table of Contents
