Feeding Paper From The Mpf - Lexmark X925 Service Manual

Hide thumbs Also See for X925:

Table of Contents

Feeding paper from the MPF

To start the paper feed, the printer controller sends a signal to turn on the MPF feed clutch; the paper feed motor

starts turning to feed the top sheet of paper in the MPF tray one by one. Once the duplex exit/MPF detection

lever senses the leading edge of the media at the duplex exit roller, it engages the duplex re-feed clutch to

transport the sheet of paper into the paper path.

Duplex transport upper roller

(Duplex clutch)

Paper feed roller

(MPF feed clutch)

Lower duplex transport roll

Std registration roller

(Delivery roller)

Duplex exit/MPF sensor actuator

Duplex exit roller

Diagnostic aids