Lexmark X925 Service Manual page 104

7541-03x
Error code
Load Manual <size>
Load Manual <type>
<size>
Paper Changes Needed
Remove All Color
Supplies
Remove Paper
Standard Bin
Remove Paper <All
bins>
Restore Held Jobs
Go/Stop?
Supply Needed
Unsupported USB
device, Please Remove
Unsupported Mode
Unsupported Disk
Paper Size Unsupported
Securely Clearing Disk
Space
2-68
Service Manual
Action
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing Select indicates to the printer it should search for a source with the proper size.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
If paper loaded is in the manual feeder, the job continues. If paper is not in the feeder,
pressing Select indicates to the printer it should search for a source with the proper type and
size.
Additional messages may include:
• More information—the printer will present instructions.
• Cancel Job—the printer job can be cancelled.
This message appears at the beginning of a parkable job. A load paper prompt will appear.
Additional messages may include:
• Prompt for each change
• Use current supplies - This is the default. The message will not appear during the
remainder of the job.
• Cancel job
• Wait for supplies - This occurs if the job is parked.
If Color Lockout mode is enabled, this message appears (unless the printer is in Diagnostics
Menu or Configuration Menu).
The standard output bin is full. Remove the media to continue.
Remove the paper from all output bins.
If the printer detects Print and Hold (or parked) jobs stored on the hard disk during Power-On
Self Test (POST). Choices are:
• Restore—Print jobs are restored, and Restoring Held Jobs x/y, where x is the number
of the job restored and y is the total number of jobs to restore. You can quit restoring, and
the remainder of the jobs will remain on the disk, but cannot be accessed until they are
restored at the next POR.
• Do not restore—Held jobs will remain on the disk, but cannot be accessed until they are
restored at the next POR. Held jobs may not be restored appears.
• Tell me more—additional information is available
A supply is needed to complete a job. Additional messages may include:
• Prompt for supplies
• Cancel
• Wait for supplies
Remove the unrecognized device to continue.
Unplug camera and change it to a mode where the camera can access PictBridge. Plug the
camera back in to continue.
Remove the unsupported disk to continue.
Make sure the paper is the correct size. Also check the tray guides to ensure they are in the
correct position. Check the paper size sensors to ensure they are in the correct position.
Disk wiping process is recovering disk space. The message clears when all memory blocks
are cleared.