Torque Limiter Removal; Upper And Lower Registration Springs Removal - Lexmark X925 Service Manual

Torque limiter removal

1.
Remove the separator roll. See
2.
Remove the torque limiter.

Upper and lower registration springs removal

1.
Remove the paperfeed unit. See
2.
Remove the clutches on the paperfeed unit. See
3.
Separate the two paperfeed units. See
page 4-177.
4.
Remove the registration gears (A).
5.
Remove the e-clips (B).
6.
Remove the registration bushings (C).
7.
Remove the registration springs (D).
"Separator roll removal" on page
"Power supply fan removal" on page
"Paperfeed unit clutch removal" on page
"Separating the MPF tray and main tray paperfeed units" on
4-183.
4-55.
4-179.
Repair information
7541-03x
4-181