Table of Contents
Advertisement
Installation & Operation Manual
3.
In the Ems Password field, change the password to match the current password
for the ems user configured on both SC boards.
4.
In the Ems User field, ensure that the ems user name is set.
5.
In the Root Password field, change the password to match the current password
for the root user configured on both SC boards.
6.
Click OK.
46.3.6.2
Adding the Media Gateway Software to the EMS Server
The Media Gateway software package must be added to the EMS Files Manager prior
to starting the Online Software Upgrade. During this process, the Media Gateway
software package is transferred from the EMS client to the EMS server. No affect on
the Media Gateway operation occurs during this transfer.
The Media Gateway software package transfer takes a few minutes in a typical IP
network environment (with 10 Mbps or better bandwidth). However, it may take much
longer if the IP network connection between EMS server and client has limited
bandwidth. Therefore, to minimize the upgrade maintenance time, it is recommended
to add the Media Gateway software package to the EMS server well in advance.
To add the Media Gateway Software to the EMS server:
1.
Insert the Installation CD into the CD-ROM drive of your PC.
2.
In the EMS menu, select Tools -> Software Manager.
3.
Click the Add File icon
4.
In the "M5K/M8K/IPM5K/IPM8K Software" pane, select the select the EMS file
(e.g. tg_Version 6.6.16.ems)and the installation package file (e.g tg_Version
6.6.16.install) located on the Installation CD and press OK.
Version 6.6
; the Add Files dialog is displayed.
819
46. Online Software Upgrade
October 2014
Advertisement
Table of Contents
Troubleshooting
