Maintenance Actions - AudioCodes Mediant 3000 User Manual

3. Click the Submit button; the date and time are automatically updated.
Notes:
3.4.1.3

Maintenance Actions

The 'Maintenance Actions' page allows you to perform the following operations:
Reset the device (refer to ''Resetting the Device'' on page 188)
Lock and unlock the device (refer to ''Locking and Unlocking the Device'' on page 190)
Save the configuration to the device's flash memory (refer to ''Saving Configuration'' on
page 190)
To access the 'Maintenance Actions' page:
On the Navigation bar, click the Management tab, and then in the Navigation tree,
select the Management Configuration menu, and then choose the Maintenance
Actions page item.
3.4.1.3.1 Resetting the Device
The 'Maintenance Actions' page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:
Save the device's current configuration to the device's flash memory (non-volatile).
Perform a graceful shutdown, i.e., device reset starts only after a user-defined time
expires (i.e., timeout) or after no more active traffic exists (the earliest thereof).
SIP User's Manual
•
If the device is configured to obtain the date and time from an SNTP
server (refer to ''Configuring the Application Settings'' on page 68), the
fields on this page are read-only and cannot be modified.
•
For an explanation on SNTP, refer to ''Simple Network Time Protocol
Support'' on page 498.
•
After performing a hardware reset, the date and time are returned to their
defaults and therefore, should be updated.
Figure 3-99: Maintenance Actions Page
188
Mediant 3000
Document #: LTRT-89707