Unix/Linux Environment - Toshiba e-Studio2000AC Software Troubleshooting Manual

6.TROUBLESHOOTING FOR NETWORK CONNECTIONS
 UNIX/Linux environment
No.
1 Are the IP address properties correctly
set?
2 Is the LPR/LPD print correctly set?
3 Did you successfully install the UNIX/Linux
filters?
4 Did you successfully create and set up a
print queue?
5 Can you print to the equipment using LPD
as the root?
6 Can you ping the equipment from your
computer?
7 Is the LP Daemon functioning?
8 Can you print to the equipment?
Check... Yes No
Next Set up the IP address correctly.

Step

Next Set up the LPD print service correctly.

Step

Next Refer to the Software Installation Guide

Step to install UNIX/Linux filters.

Next Refer to the Software Installation Guide

Step to configure the print queue.

Set up UNIX/Linux access for the
Next equipment to enable other users to print

Step from the Bourne shell. Refer to your UNIX/

Linux documentation for more
information.
Try a remote ping from another server. If
Next you can reach the equipment from that

Step server, check for conflicts between the

equipment and your current network
segment.
Next Reload Daemon or restart the system.

Step


Contact your service representative.
End
Printing Problems (Network Related) 47
Corrective Action