show tacacs-server
This command displays the current settings for the TACACS+ server.
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show tacacs-server
Remote TACACS server configuration:
Server IP address:
Communication key with TACACS server: *****
Server port number:
Console#
Web Server Commands
This section describes commands used to configure web browser management
access to the switch.
Command
ip http port
ip http server
ip http secure-server
ip http secure-port
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Table 21-7 Web Server Commands
Function
Specifies the port to be used by the web browser interface
Allows the switch to be monitored or configured from a browser GC
Enables HTTPS (HTTP/SSL) for encrypted communications
Specifies the UDP port number for HTTPS
Web Server Commands
10.11.12.13
49
21
Mode
Page
GC
21-11
21-12
GC
21-12
GC
21-13
21-11