Web Server Commands; Ip Http Port; Ip Http Server; Table - Edge-Core Direk Tronik 24/48-Port Management Manual

Web Server Commands

This section describes commands used to configure web browser management
access to the switch.
Command

ip http port

ip http server

ip http secure-server
ip http secure-port
ip http port
This command specifies the TCP port number used by the web browser interface.
Use the no form to use the default port.
Syntax
ip http port port-number
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Default Setting
80
Command Mode
Global Configuration
Example
Console(config)#ip http port 769
Console(config)#
Related Commands
ip http server (41-11)
ip http server
This command allows this device to be monitored or configured from a browser. Use
the no form to disable this function.
Syntax
[no] ip http server
Default Setting
Enabled
Table 41-7 Web Server Commands
Function
Specifies the port to be used by the web browser interface
Allows the switch to be monitored or configured from a browser GC
Enables HTTPS (HTTP/SSL) for encrypted communications
Specifies the UDP port number for HTTPS
Web Server Commands
Mode
GC
GC
GC
41
Page
41-11
41-11
41-12
41-13
41-11