Edge-Core ECS4510-28P User Manual page 1346

| Domain Name Service Commands
C 47
HAPTER
ip domain-lookup
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
Domain names are added to the end of the list one at a time.
◆
When an incomplete host name is received by the DNS service on this
◆
switch, it will work through the domain list, appending each domain
name in the list to the host name, and checking with the specified
name servers for a match.
If there is no domain list, the domain name specified with the
◆
domain-name command is used. If there is a domain list, the default
domain name is not used.
E
XAMPLE
This example adds two domain names to the current list and then displays
the list.
Console(config)#ip domain-list sample.com.jp
Console(config)#ip domain-list sample.com.uk
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS Disabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
Console#
R C
ELATED OMMANDS
ip domain-name (1347)
This command enables DNS host name-to-address translation. Use the no
form to disable DNS.
S
YNTAX
[no] ip domain-lookup
D S
EFAULT ETTING
Disabled
C M
OMMAND ODE
Global Configuration
C U
OMMAND SAGE
At least one name server must be specified before DNS can be enabled.
◆
– 1346 –
ip