Hardware Change - Christie CP2230 Service Manual

3.8

Hardware Change

The projector serial number is stored on four hardware
devices, this includes the TPC, PIB, EVB and Backplane.
If ever more than two of these hardware devices are
swapped the Hardware Change window (Figure 3-23) is
generated the next time the projector is powered ON. The
user is prompted to select which hardware device contains
the original serial number and to specify where to restore
the settings from if both the PIB and TPC serial numbers
do not match.
CP2230 Service Manual
020-100562-06 Rev. 1 (05-2016)
Section 3: Service Setups
Figure 3-23 Hardware Change Window
3-23