Hardware Change - Christie CP4230 Service Manual

Section 3: Service Setups
3.8

Hardware Change

The projector serial number is stored on four hardware
devices, this includes the TPC, PIB, EVB and Backplane.
If ever more than two of these hardware devices are
swapped the Hardware Change window (Figure 3-19) is
generated the next time the projector is powered ON. The
user is prompted to select which hardware device contains
the original serial number and to specify where to restore
the settings from if both the PIB and TPC serial numbers
do not match.
3-20
Figure 3-19 Hardware Change Window
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)