Static Wheel Balance Adjustment - Yamaha FZR400 1988-1989 Service Manual

REAR WHEEL lctf=l &x31
Do not loosen the axle nut after torque tighten-
??
ing.
If the axle nut groove is not aligned with the
??
wheel shaft cotter pin hole, align groove with
the hole by tightening up on the axle nut.
4. Install:
Always use a new cotter pin on the axle nut.
??
??
Make sure that the brake hose is routed prop-
erly.
@ B r a k e h o s e

STATIC WHEEL BALANCE ADJUSTMENT

NOTE:
??
After replacing the tire and/or rim, wheel
balance should be adjusted.
??
Adjust the wheel balance with brake disc
and wheel hub installed.
1. Adjust:
Wheel balance
??
Refer to the "FRONT WHEEL -STATIC
WHEEL BALANCE
section.
ADJUSTMENT"