Table of Contents
Advertisement
REAR WHEEL
INSPECTION
1. Inspect:
Tire
??
Rear wheel axle
??
Wheel
??
Wheel bearings
??
Refer to the "FRONT WHEEL - INSPEC-
TION".
2. Measure:
Wheel runout
??
Refer to the "FRONT WHEEL - INSPEC- .
TION".
3. Check:
Wheel balance
??
Refer to the "FRONT WHEEL - INSPEC-
TION".
INSTALLATION
Reverse the "Removal" procedure.
Note the following points.
1. Lubricate:
Rear wheel axle
??
Bearings
??
Spacer
??
Collar
??
Lithium soap base grease
2. Adjust:
Drive chain slack
??
Drive chain slack:
10 - 20 mm (0.4 - 0.8 in)
Refer to the "DRIVE CHAIN SLACK
ADJUSTMENT".
3. Tighten:
Nut (rear wheel axle)
??
Bolts (brake caliper)
??
Advertisement
Chapters
Table of Contents
