Engine Oil Level Inspection; Engine Oil Replacement - Yamaha FZR400 1988-1989 Service Manual

Table of Contents

Advertisement

5
10
0

ENGINE OIL LEVEL INSPECTION/

ENGINE OIL REPLACEMENT

15°C
3-23
ENGINE OIL LEVEL INSPECTION
1. Place the motorcycle on its centerstand and
warm up the engine for several minutes.
NOTE:
Position motorcycle straight up when checking
oil level, a slight tilt to the side can produce
false readings.
2. Stop the engine and visually check the oil
level throught the level window @ .
3. Inspect:
??
0il level
Oil level should be between maximum @
and minimum @ marks.
Low oil level --f Add oil to proper level'.
NOTE:
Wait a few minutes until level settles before
inspecting.
Recommended Engine Oil:
At 5°C (40" F) or Higher:
Yamalube 4-cycle
SAE 2OW40
At 15°C (60°F) or Lower:
SAE lOW30 Type SE Motor Oil
ENGINE OIL REPLACEMENT
2. Place a drain pan under the engine.
3. Remove:
Refer to the "COWLING REMOVAL AND
INSTALLATION - REMOVAL" section.
4. Remove:
5. Remove:
??
Drain plug @
Drain the engine oil.
6. Tighten:
??
Drain plug @
Oil Drain Plug:
43 Nm (4.3
oil or
Type SE Motor Oil

Advertisement

Table of Contents
loading

Table of Contents