FRONTANDREARBRAKE
CALIPER DISASSEMBLY
NOTE:
Before disassembling the front or rear brake
master cylinders, drain the brake hose, master
cylinder, brake caliper and reservoir tank of
their brake fluid.
Securely support the motorcycle so there is
no danger of it falling over.
Front brake
1. Remove:
Retaining pins
??
Pad spring
??
Brake pads
??
Refer to the "BRAKE PAD REPLACE-
MENT" section.
2. Remove:
Union bolt @
??
Copper washers @
??
Brake hose @
??
Place the open hose end into a container
and pump the old fluid out carefully.
3. Remove:
Caliper body
??
Do not loosen the bridge bolts @ .