SIGNAL SYSTEM CHECK
1. Horn does not sound.
1. "HORN" switch
??
Disconnect the handlebar switch coupler
from the wire harness.
??
Check the switch component for the conti-
nuity between "Pink @ a n d B l a c k @ ".
Refer to the "CHECKING OF SWITCHES"
section.
a
2. Voltace
??
Connect the Pocket Tester (DC20V) to the
horn connector.
Tester (+) Lead + Brown @ Lead
Tester (-) Lead + Frame Ground
for voltage (12V) on the "Brown"
lead at the horn terminal.
OFF (Free)
ON (Push) ckn
CORRECT
MEETS
SPECIFICATION (12V)
8-53
SIGNAL SYSTEM -1
INCORRECT
Replace handlebar switch (Left).
OUT
OF
SPECIFICATION
Check the entire lighting system for
connections.
I