Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
3. Install:
Dowel pins
??
@Gasket (Stater clutch cover) (New)
??
Stater clutch cover @
Bolts (Stater Clutch Cover):
10 Nm (1.0 m-kg, 7.2 ft-lb)
PISTON AND CYLINDER
1. Install:
NOTE:
Be sure to install rings so that Manufacturer's
marks or numbers are located on the top side of
the rings. Oil the pistons and rings liberally.
2. Install:
??
Circlips (Piston pin) @
NOTE:
haust side of the engine.
??
Before installing the piston pin circlip, cover
the crankcase with a clean rag to prevent the
circlip from falling into the crankcase cavity.
??
Be sure the marked piston numbers @ should
be in sequence (1, 2, 3, 4) begining from the
left.
Always use new circlips (Piston pin).
I
Advertisement
Chapters
Table of Contents
