Front Wheel Assembly; Front Wheel Installation; Wheel Static Balance Adjustment - Yamaha TT600RE 2004 Service Manual

1
a
FRONT WHEEL AND BRAKE DISC

FRONT WHEEL INSTALLATION

1. Install:
•
NOTE:
•
Apply LOCTITE
screw.
•
Tighten the screws (brake disc) in stage using
a crisscross pattern.
2. Install:
•
NOTE:
Make sure that the wheel hub and the speedome-
ter gear unit are installed with the projections
meshed into the slots.
3. Tighten:
•
•
NOTE:
Make sure that the slot (a) in the speedometer
gear unit fits under the stopper on the front fork
outer tube.
•

WHEEL STATIC BALANCE ADJUSTMENT

NOTE:
•
After replacing the tire and/or rim, the wheel
static balance should be adjusted.
•
Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
•
2. Set:
•
3. Find:
•
4-6
CHAS
Brake disc (1)
Screw (brake disc):
12 Nm (1.2 mkg)
®
to the threads of brake disc
Speedometer gear unit (1)
Front wheel
Front wheel axle
Front wheel axle:
59 Nm (5.9 mkg)
Pinch bolt
Pinch bolt:
9 Nm (0.9 mkg)
Balancing weight
Wheel (on a suitable stand)
Heavy spot