Wheel Static Balance Adjustment - Yamaha SR125 1997 Service Manual

FRONT WHEEL AND BRAKE DISC
6-6
4. Tighten:
: Front wheel axle
: Axle pinch bolt
CAUTION:
Before tightening the wheel axle, stroke the
front fork several times to check for proper
fork operation.
WARNING
Make sure that the brake hose is routed
properly.
YP700040

WHEEL STATIC BALANCE ADJUSTMENT

NOTE:
: After replacing the fire and/or rim, the wheel
static balance should be adjusted.
: Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
: Balancing weight 1
2. Set:
: Wheel
(on a suitable stand)
3. Find:
: Heavy spot
***************************************
Procedure:
a. Spin the wheel and wait for it to rest.
b. Put an "X " mark on the wheel's bottom spot.
1
c. Turn the wheel so that the "X
up.
d. Release the wheel and wait for it to rest.
Put an "X " mark on the wheel's bottom spot.
2
e. Repeat the above b., c., and d. several times
until all marks come to the same spot.
f. This spot is the wheel's heavy spot "X".
***************************************
CHAS
59 Nm (5.9 m:kg)
20 Nm (2.0 m:kg)
" mark is 90_
1