Yamaha FZR400 1988-1989 Service Manual page 119

COOLANT REPLACEMENT AD
Coolant filling steps:
the coolant into the radiator until the
radiator is full.
Start the engine (Coolant level decreases.)
??
Always check coolant level, and check for
coolant leakage before starting engine.
Add the coolant while engine is running.
??
??
Stop the engine when coolant level stabilizes.
Add the coolant again to specified level @ .
??
Install the radiator cap.
??
Recommended Coolant:
High Quality Ethylene Glycol
Anti-Freeze
Anti-Corrosion for Aluminum
Engine Inhibitors
Coolant and Water Mixed Ratio:
Total
1.9 L (1.7 Imp qt, 2.0 US qt)
Reservoir Tank Capacity:
(From Low to Full Level):
0.28 L (0.25 Imp qt, 0.30 US qt)
Hard water or salt water is harmful to the
??
engine. You may use distilled water if you
can't get soft water.
Do not mix more than one type of ethlen
??
glycol antifreeze
aluminum engine inhabitors.
3 - 3 1
J @!!ii
Containing
Amount:
containing corrosion for