Wheel Static Balance Adjustment - Yamaha TTR250L Service Manual

FRONT WHEEL
6.Tighten:
Nuts (axle holder) 1
Nuts 1:
10 Nm (1.0 m • kg, 7.2 ft • lb)
CAUTION:
The axle holder should be installed with
the arrow mark 2 facing upward.

WHEEL STATIC BALANCE ADJUSTMENT

NOTE:
After replacing the tire and/or rim, the
wheel static balance should be adjusted.
Adjust the wheel static balance with the
brake disc installed.
1.Remove:
Balancing weight
2.Set the wheel on a suitable stand.
3.Find:
Heavy spot
*********************************
Procedure:
a.Spin the wheel and wait for it to rest.
b.Put an "X " mark on the wheel bottom
1
spot.
c.Turn the wheel so that the "X
90° up.
d.Left the wheel fall and wait for it to rest.
Put an "X " mark on the wheel bottom
2
spot.
e.Repeat the above, b., c., and d. several
times until these marks come to the same
spot.
f. This spot is the heavy spot "X".
*********************************
6 - 6
CHAS
" mark is
1