Fuse Inspection - Yamaha FZR400 1988-1989 Service Manual

FUSE INSPECTION/HEADLIGHT BEAM ADJUSTMENT AD
FUSE INSPECTION
The fuse panel is located under the seat.
1. Inspect:
Fuses
??
Defective+ Replace.
Blown fuse (New)+ Inspect circuit.
Install new fuses of proper amperage.
Description
Main
Headlight
Signal
Ignition
Reserve
Blown fuse replacement steps:
*Turn off ignition and the circuit.
*Install a new fuse of proper amperage.
@Turn on switches to verify operation of elec-
trical device.
in question.
Do not use fuses of higher amperage rating
than recommended.
system damage and fire could result from
substitution of a fuse of improper amperage.
HEADLIGHT BEAM ADJUSTMENT
1. Adjust:
?? Horizontal adjustment:
To adjust the beam to the right, turn the
adjusting screw @ clockwise.
To adjust the beam to the left, turn the
screw @ counterclockwise.
3-46
J m
Amperage Quantity
30A 1
1
1
1
1
1
30A
Extensive electrical