STEERING HEAD AND HANDLEBAR
INSPECTION
2. inspect:
Bearing race remplacement steps:
??
??
??
NOTE:
Always replace bearings and races as a set.
3. Inspect:
4. Inspect:
1. Wash the bearing in a solvent.
Bearings
??
Bearing race
??
Pitting/Damage 4 Replace.
Remove the bearing races using long rod @
and the hammer as shown.
Remove the bearing race on the steering
stem using the floor chisel @ and the ham-
mer as shown.
install the new dust seal and races.
Handlebars
??
Bents/Damage + Replace.
Handlebar
bosses
??
Cracks/Damage + Replace