Cylinder And Piston - Yamaha FZR400 1988-1989 Service Manual

ENGINE DISASSEMBLY
3. Remove:
Nuts (Cylinder head)
??
Use the Hexagon Wrench 6 mm (0.24 in)@.
NOTE:
Loosen the nuts in their proper loosening
??
sequence.
Follow numerical order shown in photo.
??
Start by loosening each nut l/2 turn until
all are loose.
4. Remove:
Cylinder head
??
NOTE:
Remove the cylinder head as a whole to prevent
the valve lifters and adjusting pads from falling
into the crankcase.
5. Remove:

CYLINDER AND PISTON

NOTE:
With the engine mounted, the cylinder and piston
can be maintained by removing the following
parts.
Lower cowlings (Left and right)
??
??
Center cowlings (Left and right)
Seat
??
Radiator
??
??
Air filter case
Carburetor
??
Muffler assembly
??
Down tube frame (Right)
??
Cylinder head
??
4-10