Cam Chain Tensioner - Yamaha FZR400 1988-1989 Service Manual

ENGINE ASSEMBLY AND ADJUSTMENT

CAM CHAIN TENSIONER

1. Position:
Cam chain
??
Exhaust side -+ Tense.
Intake side + Slack.
2. Install:
Cam chain tensioner
??
Cam chain tensioner installation steps:
Remove the tensioner end cap bolt and
??
spring.
Release the cam chain tensioner one-way
??
cam @ and push the tension rod @ .
Install the tensioner with a new gasket into
??
the cylinder.
Bolts (Cam Chain Tensioner) :
10 Nm (1.0 m-kg, 7.2 ft-lb)
Install the collar @ , springs @ , washer @
??
and end cap bolt 0.
End Cap Bolt (Cam Chain Tensioner):
20 Nm (2.0 m-kg, 14 ft.lb)
3. Turn:
Crankshaft
??
Counterclockwise for a several turns.
4. Inspect:
Camshaft timing marks @
??
Align with the camshaft cap marks @ .
Align with the crankcase end 0.
Out of alignment + Adjust.
Refer to "CAMSHAFT INSTALLATION
STEPS".
5. Install:
Gasket (Cylinder head cover)
??
Cylinder head cover
??
Bolts (Cylinder Head Cover):
10 Nm (1.0 m-kg, 7.2 ft-lb)
I