Table of Contents
Advertisement
3. Starter motor
and starter motor cable @ using the jumper
lead @ * as shown.
4. Starter relay
Disconnect the starter relay lead.
??
??
Ground the starter relay lead @ to the
frame using the jumper lead @ as shown.
a
5. Starting circuit cut-off relay
Disconnect the relay assembly coupler from
??
the wire harness.
??
Connect the pocket tester (a x 1) and
battery (12V) voltage to the relay assembly
coupler terminals.
ELECTRIC STARTING SYSTEM p-p@
OPERATIVE
OPERATIVE
the equivalent capacity as that of the
battery lead or more, otherwise it may
cause the jumper lead to be burned.
so be sure that no flammable gas or
fluid is in the vicinity.
NO OPERATIVE
Repair or replace starter motor.
NO OPERATIVE
Replace starter relay.
I
I
Advertisement
Chapters
Table of Contents
