Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
A.C. MAGNETO
1. Install:
??
Pickup coil @
??
*Woodruff key @
Bolts (Stator
10 Nm (1.0 m-kg, 7.2 ftslb)
Use LOCTITE@
Screws (Pickup Coil):
Nm (0.5 rn. kg, 3.6 ft. lb)
5
NOTE:
and magneto.
??
When installing the magneto, make sure the
woodruff key is properly seated in the key way
of the crankshaft.
2. Install:
Bolt (Magneto)
??
3. Attach :
Universal Rotor Holder @
??
NOTE:
Hold the magneto to tighten the nut by the
Universal Rotor Holder @ .
Universal
Rotor
P/N Y U-01 235
4. Tighten:
Bolt (Magneto)
??
Coil Assembly):
Holder:
Advertisement
Chapters
Table of Contents
