Table of Contents
Advertisement
ENGINE ASSEMBLY AND ADJUSTMENT
3. Install:
*Starter lever @
Bolt (Starter Lever) :
8 Nm (0.8 ma kg, 5.8 ft. lb)
4. Install:
Drive chain @
??
Drive sprocket @
??
Lock washer (New) @
??
Nut (Drive sprocket) @
??
Nut (Drive Sprocket) :
70 Nm (7.0 me kg, 50 ft. lb)
NOTE:
Adjust the drive chain slack if necessary.
5. Install:
*Cover (Crankcase Left)
*Shift arm
Bolts (Crankcase Cover) :
10 Nm (1.0 m-kg, 7.2 ft*lb)
Use LOCTITE@
Bolt (Shift Arm) :
10 Nm (1.0 m-kg, 7.2 ft-lb)
6. Install:
Muffler assembly
??
7. Tighten :
Flange nuts (Exhaust pipe)
??
8. Tighten:
Bolt (Muffler bracket) @
??
??
Bolt (Muffler stay) (For California only
Bolt (Muffler Bracket):
20 Nm (2.0 m-kg, 14 ftslb)
Bolt (Muffler Stay -
For
California
20 Nm (2.0 m-kg, 14 ftelb)
only):
Advertisement
Chapters
Table of Contents
