Auto Repeater Function; D Frequency Range And Offset Direction - Icom IC-T70A Instruction Manual

5
REPEATER AND DUPLEX OPERATIONS

■ Auto repeater function

The U.S.A. and Korean versions automatically use standard
repeater settings
(duplex ON/OFF, duplex direction, tone encoder
when the operating frequency falls within or outside
ON/OFF)
of the general repeater output frequency range. The offset
and repeater tone frequencies are not changed by the auto
repeater function. Reset these frequencies, if necessary.

D Frequency range and offset direction

• U.S.A. version
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
442.000–444.995 MHz
447.000–449.995 MHz
• Korean version
FREQUENCY RANGE
439.000–440.000 MHz
27
SHIFT DIRECTION
"DUP–" appears
"DUP" appears
"DUP" appears
"DUP–" appears
SHIFT DIRECTION
"DUP–" appears
q While continuing to push [SET], turn the power ON to
enter the Initial set mode.
w Rotate [DIAL] to select the auto repeater set item, then
rotate [VOL] to set the auto repeater setting.
U.S.A. version:
• "R1" : Activates duplex only. (default)
• "R2" : Activates duplex and tone.
• "OFF" : Auto repeater function is turned OFF.
Korean version:
• "On" : Activates duplex and tone. (default)
• "OFF" : Auto repeater function is turned OFF.
[DIAL]
[VOL]
e Push [ ] to return to the frequency display.
Auto repeater setting
U.S.A. version
Korean version