Adding A Custom Snapshot Method; Changing Or Showing A Custom Snapshot Method; Removing A Custom Snapshot Method - IBM TotalStorage NAS Gateway 500 Administrator's Manual

your cluster snapshot, you can configure a custom snapshot method. Three tasks
are available for configuring a custom snapshot method:
v "Adding a custom snapshot method"
v "Changing or showing a custom snapshot method"
v "Removing a custom snapshot method"

Adding a custom snapshot method

1. Enter the smit hacmp fastpath.
2. Select Extended Configuration and press Enter.
3. Select Snapshot Configuration and press Enter.
4. Select Configure Custom Snapshot Method.
5. To add a custom snapshot method, select Add a Custom Snapshot Method
6. Enter the name of the custom snapshot and any description of it in the
7. Press Enter and the custom method is saved.
8. Press Esc+0 to exit SMIT

Changing or showing a custom snapshot method

1. Enter the smit hacmp fastpath.
2. Select Extended Configuration and press Enter.
3. Select Snapshot Configuration and press Enter.
4. Select Configure Custom Snapshot Method.
5. To change or show a custom snapshot method, select Change/Show a
6. The custom snapshot information is displayed. If you only want to show the
7. You can change the New Custom Snapshot Method Name, Custom Snapshot
8. Press Enter and the custom method is changed.
9. Press Esc+0 to exit SMIT.

Removing a custom snapshot method

1. Enter the smit hacmp fastpath.
2. Select Extended Configuration and press Enter.
3. Select Snapshot Configuration and press Enter.
4. Select Configure Custom Snapshot Method.
5. To remove a custom snapshot method, select Remove a Custom Snapshot
6. A list of available methods to be removed is displayed. Select the method you
306
NAS Gateway 500 Administrator's Guide
and press Enter.
corresponding fields. For the Custom Snapshot Script Filename, enter the path
of the script you want to use with your cluster snapshot.
Note: This script is a user defined script that is used to store information.
Custom Snapshot Method and press Enter. A list of available custom methods
is displayed. Select the method you want to change.
custom method information, press Esc+0 to exit SMIT.
Method Description, and Custom Snapshot Script Filename fields used for the
custom method. Select the fields you want to change and enter the new values.
Method.
want to remove and press Enter. A confirmation dialog asking ARE YOU
SURE? will be displayed. Press Enter to continue the removal or press Esc+3
to cancel.