Cifs Basic Setup - IBM TotalStorage NAS Gateway 500 Administrator's Manual

SMIT fastpath
The SMIT menu fastpath command to stop a CIFS server is smit cifs. Then select
Server Statistics.

CIFS basic setup

Basic setup sets the CIFS parameters for your configuration.
CLI command
Server Name
Start Server
Domain Name
Description
Server alias(es)
WINS Address
Backup WINS address
Proxy WINS Server
NetBIOS Name Server (NBNS)
NetBIOS Datagram Server
Master Browser
Multi-Session support
140
NAS Gateway 500 Administrator's Guide
The name of the server. The name of the CIFS server defaults to the
TCP/IP hostname of the machine. Use this field to change the server name.
A CIFS server name can be no longer than 15 characters.
Starts the CIFS server. This enables clients to access all of the resources
(shares) that the server has defined.
Specify the name of the domain to which this server belongs. The Domain
Name is the name assigned to a group of servers that interoperate to
provide resources as a single unit.
Description comments for this server.
Displays server alias(es)
Specify the full IP address of the machine that acts as the Windows Internet
Name Service (WINS) server. The WINS server provides a NetBIOS name
service in which the server keeps a table of names on the subnetwork and
their IP addresses. The internet address uses dotted decimal form, such as
d.d.d.d, where "d" is a decimal value from 0 to 255, inclusive.
The Backup WINS Address is the IP address of the WINS server that is
used when the primary WINS server is not available. Specify the internet
address in the following format: d.d.d.d, where "d" is a decimal value from 0
to 244, inclusive. This field is optional.
The WINS proxy server allows clients without WINS capability to work with
a WINS server. The WINS proxy server interoperates with non-WINS clients
using Broadcast Node protocol and communicates with the WINS server on
their behalf. This field is optional.
Allows you to add, delete, back up, restore, and list the NetBIOS Names
entries that the WINS server keeps in its table. A NetBIOS Name Server
can be no longer than 15 characters.
If enabled, AIX Fast Connect server supports NetBIOS DataGram service
Specifies if CIFS can act as a Master Browser for its domain/workgroup.
Specifies if multiple user sessions from a single workstation is supported.
Do not use this with the network logon feature.