WebSM
To replace a disk within a remotely mirrored NAS volume from the main WebSM
panel, navigate to: NAS Management→NAS System→Volumes→All Remote Mirror
Volumes→ (right-click a volume) →Replace Disk.
Viewing I/O statistics for a remotely mirrored NAS volume
You can view I/O statistics for remotely mirrored NAS volumes.
CLI command
At the command prompt, enter volstat [ -n node_name ] volumename [ interval [
count ] ]
SMIT fastpath
The SMIT fastpath command to view I/O statistics for remotely mirrored NAS
volumes is smit volstat.
WebSM
To view I/O statistics for remotely mirrored NAS volume from the main WebSM
panel, navigate to: NAS Management→NAS System→Volumes→All Remote Mirror
Volumes→ (right-click a volume) →Statistics.
Clearing NAS information from a remote disk
You can clear NAS information from a remote disk.
CLI command
At the command prompt, enter chpgeovol -C node_name remote_hdisk.
SMIT fastpath
The SMIT fastpath command to clear NAS information is smit chpgeovol.
WebSM
Not applicable
Managing Remote Mirrored systems
Use the following tasks to manage Remote Mirrored systems:
v "Starting a mirror"
v "Stopping a mirror" on page 176
v "Listing mirrors" on page 176
v "Viewing mirror log files" on page 176
v "Taking mirror snapshots" on page 177
v "Listing mirror snapshots" on page 177
v "Restoring mirrors from a snapshot" on page 178
Starting a mirror
You can start mirroring on one or more volumes.
CLI command
From the command line, enter
startmirror -d {ALL
| devicename [ devicename... ] }
Chapter 29. Managing NAS volumes, Remote Mirrored systems, and snapshots
175