Memory Notes; Adding More Engine Memory To Increase Performance; Using The Recovery Cd-Rom If You Have Added More Processor Memory - IBM TotalStorage NAS 300 User Reference

Memory notes

The following sections contain information on adding memory.

Adding more engine memory to increase performance

You can enhance the performance of the NAS Gateway 300 in an NFS environment
by adding more RAM to its processor. To do this:
1. Purchase either of the 5187 memory field-upgrade feature codes from your IBM
2. Follow the instructions in Chapter 3, section "Replacing memory modules," of
3. Before rebooting the appliance, attach a keyboard and display directly to the
Using the Recovery CD-ROM if you have added more processor
memory
If you have installed more processor memory, and later use the Recovery CD-ROM
(see Chapter 9, "Using the Recovery and Supplementary CD-ROMs" on page 111),
you will have to attach a keyboard and display and answer questions about the
additional memory that you have installed.
86
NAS Gateway 300 User's Reference
representative:
0301 1 GB memory upgrade
0302 2 GB memory upgrade
the Installation Guide.
rear connectors of the product. During the first IPL, you will have to read and
answer questions about the additional memory you have installed.