Table of Contents
Advertisement
3. A Volume configuration panel appears.
Figure 32. Volume configuration panel
62
NAS Gateway 500 Administrator's Guide
Use this panel to enter the specifics associated with the NAS volume you are
defining.
a. The Volume name field is for the name you want to use to identify created
NAS volumes.
Note: When the volume name specified by volume is mounted, it will be
mounted as /Vols/volume.
b. The Hostname drop-down box is the name of the host that owns the volume
in a clustered configuration.
c. The Maximum number of snapshots scroll box is for the maximum number
of snapshots that can be allocated on a volume. The maximum number that
can be used is 15.
d. The Snapshot size scroll box is for the percentage of the file system space
reserved for snapshots.
e. The Enable CIFS sharing check box allows you to specify that you want the
new NAS volume to be created as a CIFS share. CIFS file serving is an
optional feature of the NAS Gateway 500. This feature must be enabled
before using CIFS shares.
Advertisement
Table of Contents
