IBM TotalStorage NAS Gateway 500 Administrator's Manual page 32

Table 2. NAS administrator's installation checklist (continued)
Task
If Clustering or Remote Mirroring, configure
h
clustering.
Otherwise, configure the network.
h
Define network static routes.
h
If using CIFS, configure CIFS.
h
If storage is not pre-configured, then complete
h
configuration of storage.
Create volumes.
h
Verify prerequisites for Electronic Service
Agent:
h Root authority
h Free disk space
h RSH DSH or FTP-capable
h IBM diagnostics installed
h Java available
h Serial port 2 available
h Modem set up and configured
h Telephone connected and operational
h PPP installed, configured and running
h E-mail service available
h Host name, machine type, model and
serial number available
Complete Electronic Service Agent installation
h Install Service Agent Gateway from
SMIT or CLI
h Configure Electronic Service Agent
h Managing console attached to serial port 1
10
NAS Gateway 500 Administrator's Guide
Reference
See Chapter 10, "Using the Cluster Wizard," on page
43.
See Chapter 9, "Using the Network Configuration
Wizard," on page 41.
See Chapter 11, "Using the Static Routes Wizard," on
page 51.
See Chapter 12, "Using the CIFS Wizard," on page
53.
See Chapter 13, "Using the Volume Wizard," on page
59.
See "Managing NAS volumes" on page 165.
Electronic Service Agent
See "Electronic Service Agent prerequisites" on page
202.
See Appendix A, "Modem configurations," on page
255.
See "Installing the Electronic Service Agent" on page
205.
Service Processor