Backup; Restore - IBM TotalStorage NAS Gateway 500 Administrator's Manual

WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSM →Configure TSM Client→specify
settings→OK.

Backup

SMIT fastpath
The SMIT menu fastpath command for incremental backup is smit tsmcbackupi.
The SMIT menu fastpath command for selective backup is smit tsmcbackups.
Go to SMIT→Manage Applications →Backup and Recovery with Tivoli Storage
Manager (TSM)→Backup using TSM→TSM Incremental Backup. Move the cursor
to Entry Fields to enter or select values. Press Enter.
Press F4 to display a list of the NAS volumes available for backup (for example:
/Vols/nasvol1). This input is passed to the TSM client for command line execution.
The files then go to the TSM server for backed up data management. The migration
of data to tape occurs within the TSM server definitions, outside of the NAS
Gateway 500.
WebSM
From the main WebSM panel, navigate to : NAS Management→NAS System→Node
(Server IP Address)→Applications→TSM→Backup Using TSM Client→specify
settings→OK.

Restore

SMIT fastpath
The SMIT menu fastpath command to restore volumes is smit tsm_recov.
The SMIT menu fastpath command to restore files is smit tsmcrestoref.
Go to SMIT→Manage Applications →Backup and Recovery with Tivoli Storage
Manager (TSM)→Recover using TSM→TSM Restore Volume(s). Move the cursor
to Entry Fields to enter or select values. Press Enter.
Additional TSM client-specific restore options include:
-subdir=yes
-replace=all
These options can be added to the entry for restoring the file or volume. For
example:
WebSM
From the main WebSM panel, navigate to: NAS Management→NAS System→Node
(Server IP Address)→Applications→TSM→Recover Using TSM Client→specify
settings→OK.
94
NAS Gateway 500 Administrator's Guide
To restore all files in all subdirectories.
To restore all files without prompting.
/Vols/nasvol2/ -subdir=yes -replace=all