Table of Contents
Advertisement
4. Select Advanced Basic Text User Interface.
5. Type password as the initial password, and press Enter. The advanced panel is
Figure 53. Electronic Service Agent advanced panel
Adding a machine
1. Select Network.
2. Select A (Add).
3. Select Child.
4. Select Machine.
5.
6. Select FTP, DSH, or RSH protocol option from the Type of Installation table.
7. Enter S to save the data.
8. If you use the FTP protocol, the Enter the User ID and Password window
Installing the Electronic Service Agent code on a monitored
machine only
To install the Electronic Service Agent code on a monitored machine only:
1. Select Administration.
2. Select Un (Uninstall).
3. Select Install and the appropriate client number.
4. Enter I (Install) and the appropriate NAS Gateway 500 number.
If you use the FTP protocol, the Enter the User ID and Password window appears.
Enter the password for root. If you cannot use root and the root password, you can
change the user ID to a root-authorized user ID and use the password of that ID.
222
NAS Gateway 500 Administrator's Guide
displayed:
IBM Electronic Service Agent for NAS Gateway 500
--------------------------------------------------------------------current menu
-------------------------------------------------------------------panel 1 of 1
1. Network
2. CallLog
3. Administration
4. Alerts
5. Filter Lists
6. Manual Tools
7. Test Tools
--------------------------------------------------------------------------------
Options -> [#] - Select
--------------------------------------------------------------------------------
User Input: _
Complete all the required fields for the selected machine (marked by an
asterisk).
appears. Enter the password for root. If you can not use root and the root
password, you can change the User Id field to a root-authorized user ID and
use password of that ID.
Note: First select the host, scroll the range, hold the shift key and select ending
host.
version
(R3.1.0.0) (Advanced)
Advertisement
Table of Contents
