Table of Contents
Advertisement
SMIT fastpath
The SMIT fastpath to start PC NFS services is:
1. Enter smit nfs.
2. Select Start PC NFS.
3. If desired, modify default values for the protocol, socket type, and wait indicator
Stopping PC NFS
You can stop the rpc.pcnfsd daemon.
CLI command
To stop PC NFS services using the command line, use the rmpcnfs command.
SMIT fastpath
The SMIT fastpath to stop PC NFS services is:
1. Enter smit nfs.
2. Select Stop PC NFS.
3. Specify the protocol to stop. If multiple protocols have been started, each must
Common Internet File System
This section describes how to use the Common Internet File System (CIFS). For
more information on configuring and administering the CIFS server, refer to the IBM
TotalStorage NAS Gateway 500 CIFS File Serving Guide.
Note: CIFS file serving is an optional feature of the NAS Gateway 500. This
The NAS Gateway 500 contains Common Internet File System (CIFS) server
software to provide file sharing to Windows clients.
CIFS server tasks are:
v "Starting the CIFS server" on page 139
v "Stopping the CIFS server" on page 139
v "CIFS server status" on page 139
v "CIFS server statistics" on page 139
CIFS configuration tasks are:
v "CIFS basic setup" on page 140
v "CIFS authentication" on page 141
v "CIFS resource limits" on page 142
v "CIFS fileserver characteristics" on page 142
CIFS file share tasks are:
v "Listing all currently available CIFS Shares" on page 143
v "Creating a CIFS share" on page 143
v "Changing attributes of a CIFS share" on page 144
stores information about the starting of the service. When the service is
removed, it then has a stopsrc issued to the service to stop it.
(if multiple protocols are desired, each must be started separately).
be stopped separately.
feature must be enabled to use the commands in this chapter.
Chapter 25. Managing file serving
137
Advertisement
Table of Contents
