Chapter 18. Using Websm After Initial Configuration - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Chapter 18. Using WebSM after initial configuration

Note: Before you use this WebSM interface, the initial configuration of the NAS
WebSM is a client-server Java application that gives you a powerful mechanism to
manage NAS Gateway 500 systems with a familiar Web browser-like interface. This
WebSM graphical user interface enables you to access and manage remote NAS
Gateway 500 systems.
Note: The WebSM interface provides a subset of the functionality that is available
The WebSM application can be executed both from root and NAS Administrator
login. However, you should log in as a NAS administrator when you want to perform
NAS administration tasks.
To begin a NAS administrator session, you must:
1. Launch the WebSM Remote Client from another host system in your
2. Log in with a NAS administrator ID to the IP address of the NAS Gateway 500.
3. The NAS Management realm is displayed as shown in Figure 42 on page 84.
© Copyright IBM Corp. 2004
Gateway 500 as described in Part 2, "Initial configuration," on page 11 must
be completed.
using the command line or SMIT.
environment that has the WebSM Remote Client installed.
83