Managing Devices - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Managing devices

Table 24. Devices command SMIT fastpaths and WebSM access
Command Description
cfgmgr Configure new devices.
SMIT fastpath
WebSM
lscfg Show system device configuration.
SMIT fastpath
WebSM
lspvol Show configured disks.
SMIT fastpath
WebSM
lspvol (specific) Show configured disks (specific).
SMIT fastpath
WebSM
rmdev Unconfigure devices.
SMIT fastpath
WebSM
chpvol Clear NAS volume information from the disk.
SMIT fastpath
WebSM
chpgeovol Clear NAS volume information from the disk.
SMIT fastpath
WebSM
smit cfgmgr
NAS Management→NAS
System→Node→Devices→Overview and
Tasks→Discover devices that were powered on
after the last system restart
smit lscfg
smit lspvol
NAS Management→NAS
System→Node→Devices→Disks
smit lspvoldisk
NAS Management→NAS
System→Node→Devices→Disks→ (right-click a
disk)→Attributes.
smit rmdev
NAS Management→NAS System→Node→
Devices→Disks→ (right-click a disk)→ Take Offline
(Make Defined) or Delete.
smit chpvol
NAS Management→NAS
System→Node→Devices→Disks→(right-click a
disk)→Clear Volume Information.
smit chpgeovol
Appendix B. Command shortcuts using SMIT fastpath and WebSM
273