Exporting All Volumes; Exporting A Specific Volume From The Export List; Changing Or Showing Attributes Of An Exported Directory - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Exporting all volumes

You can start exporting all the directories defined for export. Use the exportnasfs
command when the directories are not exported at system startup.
In a clustered environment, the Node/Group field can be used to specify directories
that only reside in one Node/Group
Refer to the IBM TotalStorage NAS Gateway 500 Command Reference for the
syntax and parameter description for the exportnasfs command.
SMIT fastpath
The SMIT fastpath to export all volumes is:
1. Enter smit nfs.
2. Select Export All Volumes.
3. Specify the Node/Group to begin exporting from by pressing ESC+4 and select

Exporting a specific volume from the export list

You can export a single directory from the list of exports. This command only
exports one directory at a time.
In a clustered environment, the Node/Group field can be used to specify directories
that only reside in one Node/Group.
Refer to the IBM TotalStorage NAS Gateway 500 Command Reference for the
syntax and parameter description for the exportnasfs command.
SMIT fastpath
The SMIT fastpath to export a specific volume is:
1. Enter smit nfs.
2. Select Export Specific Volume from Export List.
3. Specify the directory to export by pressing Esc+4.

Changing or showing attributes of an exported directory

You can modify all of the attributes specified after an export is defined. Use this
command to add or remove clients that are allowed access to this export.
This command only applies to one share at a time.
Refer to the IBM TotalStorage NAS Gateway 500 Command Reference for the
syntax and parameter description for the chnasnfsexp command.
SMIT fastpath
The SMIT fastpath to change or show attributes of an exported directory is:
1. Enter smit nfs.
2. Select Change / Show Characteristics of Currently Exported Volume.
3. Press Esc+4 to select the export to change or show.
4. Modify any fields as needed.
134
NAS Gateway 500 Administrator's Guide
the Node/Group that should begin exporting all of its defined exports. If no
Node/Group is specified, the default behavior is to export the directories from
the local node.