Chapter 35. Miscellaneous Administration Tasks; How To Change Snmp V3 For Single Node - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Chapter 35. Miscellaneous administration tasks

This section describes miscellaneous administration and integration tasks for the
NAS Gateway 500.

How to change SNMP V3 for single node

Although SNMP version 1 is the default on the NAS Gateway 500, you can, with
root authority, optionally change a single-node gateway configuration to SNMP
version 3.
Note: SNMP version 3 is not a supported feature on any clustered configuration.
Use these commands to modify the version of SNMP:
To change to the snmpdv1 agent, enter: /usr/sbin/snmpv3_ssw_1. This the
default.
To change to the encrypted version of the snmpv3 agent, enter:
/usr/sbin/snmpv3_ssw -e
To change to the non-encrypted version of the snmpv3 agent, enter:
/usr/sbin/snmpv3_ssw -n
Note: This process requires root user authority.
© Copyright IBM Corp. 2004
251