Directories; Nis Smit Fastpaths And Websm Access - IBM TotalStorage NAS Gateway 500 Administrator's Manual

Directories

This section contains the following information:
v "NIS SMIT fastpaths and WebSM access"
v "NIS+ command SMIT fastpaths and WebSM access" on page 269
v "LDAP SMIT fastpaths and WebSM access" on page 270

NIS SMIT fastpaths and WebSM access

Table 20. NIS SMIT fastpaths and WebSM access
Command Description
mkclient Configure host as NIS client. This starts the ypbind daemon.
SMIT fastpath
WebSM
chclient Reconfigure host as a NIS client.
SMIT fastpath
WebSM
chypdom Change current domain name of the system.
SMIT fastpath
WebSM
ypbind Configure binding of client to server.
SMIT fastpath
WebSM
ypcat Prints a NIS map.
SMIT fastpath
WebSM
ypmatch Displays value of keys in NIS map.
SMIT fastpath
WebSM
smit mkclient
NAS Management→NAS System →Directory
Services→NIS→NIS Client→(right-click the client).
Select Open from the Selected menu.
smit chclient
NAS Management→NAS System →Directory
Services→NIS→NIS Client→(right-click the client).
Select Open from the Selected menu.
smit chypdom
NAS Management→NAS System →Directory
Services→NIS→NIS Client→(right-click the client).
Select Open from the Selected menu.
smit ypbind
NAS Management→NAS System →Directory
Services→NIS→NIS Client→(right-click the client).
Select Bind Client to a Server from the
Selected menu.
smit ypcat
N/A
smit ypmatch
N/A
Appendix B. Command shortcuts using SMIT fastpath and WebSM
267